Comtech EF Data turboIP v4.0 User Manual
Page 105
Advertising
![background image](/files/778857/content/doc105.png)
turboIPv4.0
Revision 6
Sample Configuration
MN/TURBOIP.IOM
7-7
The following table defines the configuration settings for each turboIP.
Configuration Parameter
Hub turboIP
Remote turboIP (1 & 2)
WAN Transmission Rate
15 Mbps (set to the maximum
rate)
15 Mbps (set to the maximum
rate)
Congestion Control
Per-Connection Per-Connection
Selective Acceleration
No Selective Acceleration Rules are required. Rules could be
added to prioritize or set BW limits on any type of traffic.
Route Table
No Route Table entries are required. Routes could be added
to allow remote access from outside of LAN subnet.
Advertising