Comtech EF Data turboIP v4.0 - Manual (Page 22)

turboIPv4.0 Revision 6
Fail to Wire MN/TURBOIP.IOM
2-2
2.3 F
AIL TO
W
IRE
B
OARD
I
NSTALLED
If the Fail to Wire (FTW) board is installed in the turboIP, then the last four characters of
the Unit ID on the Upgrade page will read “FWFD”.
The presence of a FTW board can be verified by looking at the Unit ID on both the HTTP
interface and the CLI interface as shown below.