Comtech EF Data turboIP v4.0 - Manual (Page 43)

turboIPv4.0 Revision 6
Configuring turboIP ™ MN/TURBOIP.IOM
4–15
If SNMP v3 is selected, see the following table.
Step Configuring Item for
SNMP v3 Default
Value Format Example
1 SNMP sysName N/A ‘Comtech’
2 SNMP sysLocation N/A ‘Tempe,
Arizona’
3 SNMP sysContact N/A ‘TechSupport’
4 Trap Destination IP
Address
N/A ddd.ddd.ddd.ddd ‘192.1.1.1’
5 Username ‘snmpadmin’
6 Enable Authentication 1 for Yes
2 for No
6-1 Auth. Passphrase Enter Authentication
Passphrase if
Authentication is
selected.
Between 8-255
characters.
‘comtechauth’
7 Enable Privacy 1 for Yes
2 for No
7-1 Priv. Passphrase Enter Privacy
Passphrase if Privacy is
selected.
Enter between 8 and
255 characters.
‘comtechprivacy’
8 enable SNMP N/A 1 for Enable
2 for Disable
9 Save SNMP Changes N/A 1 for save changes
2 for Cancel changes
10 Return to Configuration
Wizard N/A