3 verify and start dataminer, 2 start the dataminer service – Comtech EF Data NetVue Release 1.1 User Guide User Manual
Page 41
Advertising

Operations
Revision 3
NetVue User Guide
MN-NETVUE
2–8
2.1.2.1
vSphere client access to Windows 2012 Server
1. Use the Console tab to log in to Windows 2012 with the supplied login credentials.
2. Change the IP addresses of the Ethernet Interfaces in Windows to fit your network.
2.1.3
Verify and Start DataMiner
2.1.3.1
Verify DataMiner service is started
1. Go to the system Tray in the lower right corner.
2. Find the DataMiner Icon.
3. To see if the service is started, hold the mouse cursor over the DataMiner icon.
2.1.3.2
Start the DataMiner Service
1. Go to the system Tray in the lower right corner.
Advertising