Flowserve Byron Jackson Type M - Manual (Page 41)

® Byron Jackson Double Mechanical Seal Submersible Pumping Unit • 1042.293/9 • June 04
Page 41 of 68
Use of BAND-IT steel bands
1. Cut off about 12" of band from the bulk roll.
Figure 29 Use of "Band-It" steel band, step 1
2. Hook one end on the buckle and bring the
other end around the object to be banded and
through the buckle.
For best results, apply the band twice around.
Double banding develops almost 4 times the
grip of single banding.
Figure 30 Use of "Band-It" steel band, step 2
3. Draw band tight.
With the thumb on the band gripper lever, ap-
ply tension with the tool.
Figure 31 Use of "Band-It" steel band, step 3
4. Apply a proper amount of tension. The band
gripper lever locks itself under tension.
Figure 32 Use of "Band-It" steel band, step 4