Fluke Biomedical DALE601 - Manual (Page 38)

DALE601/601E
Operators Manual
2-14
3. Select the lead to be tested by the LEADS switch.
LEADS
fcu12.eps
4. Take measurements for any combination of the OUTLET switch, the
ground intact or lifted, and the DUT power ON or OFF .
5. Rotate the LEADS switch to test each lead individually, including the
ALL position for testing all leads connected together.
LEADS
fcu17.eps
Current measured should be the same for all leads, including the ALL
position, as the current represents the isolation impedance to the patient
circuit.