FSR FLEX CONTROL BUILDER TRAINING MANUAL - Manual (Page 109)

LIT1368E Flex Training Manual
Page | 109
32600 LIT1368F
Actions can be set in the Low to High and the High to Low action blocks.
Note: Best practice is to use a relay such as FSR’s K10-D to interface the contactors. Check
hardware manual and white paper on the FSR Web Page for further details.
Adding a GPIO command to a button:
Generally speaking these will be a toggle button style so for this exercise select the toggle
tab.
For this exercise, select a button and then Set/Clear GPIO from the actions list.