FSR FLEX CONTROL BUILDER TRAINING MANUAL - Manual (Page 76)

LIT1368E Flex Training Manual
Page | 76
32600 LIT1368F
BEEP
A beep command can be added to any buton press or event. To demonstrate this, click the
+TEST on the Project Tree and then button 1 on the Project Tree which is the A button on
the screen.
This will be a press only action. On the command list, click the BEEP command.
This command tells the Flex to beep. This can be used at anytime to provide audible
feedback. For example, if you turn Auto Press Beep off, but you want certain buttons to
beep to provide feedback, you can add the beep command to those buttons.