FSR FLEX CONTROL BUILDER TRAINING MANUAL - Manual (Page 96)

LIT1368E Flex Training Manual
Page | 96
32600 LIT1368F
Pass-Through Command .
This is a feature on all FSR Intelli-Tools modules as well as the PathFinder matrix
switchers. These devices have an inbound serial port, like any other serial device, but they
also contain a second, pass-through port that can be connected to another device. This
allows 1 serial port on the Flex control system to control multiple devices.
If you are going to use a device with serial pass-through capabilities and you intend to pass
commands through to an additional device, check this box. If you are only going to talk to
the device itself and not pass anything through, do not check this box.