FSR FLEX CONTROL BUILDER TRAINING MANUAL - Manual (Page 119)

LIT1368E Flex Training Manual
Page | 119
32600 LIT1368F
Again you are given the option to connect via Serial Port or Ethernet. You are
synchronizing several Flex LT panels. Therefore it is faster to connect via Ethernet since all
the panels should be networked already.
Click the Add button and then enter the IP address of the first Flex Lt panel you want to
have in the synchronized group and click on connect.
Click on the Add button. Click into the IP box and type the IP address of the first Flex panel
you want to Sync. Now repeat to add each Flex panel IP address that will be part of this
group.
Click the Refresh All button on bottom of screen..