Bass adjustment request – FSR IT-VCM User Manual
Page 10
Advertising
Page 10 of 16
Bass Adjustment Request:
The Controller will be able to adjust bass serially, from -15dB to +15dB.
"VBS" Function
<CR>
Where:
"VBS"
VCM
Bass
Request.
Function
"+"
"+" = VCM Bass up request
"-"
"-" = VCM Bass down request
"?"
VCM Bass Status Request Bass Status
The increment and decrement (+,-) requests may contain a single digit that indicates how many dB
steps to increment or decrement. The range of increase or decrease is 2 to 9.
The IT-VCM will respond with a status message that reflects the bass setting after performing the
request (see below).
Example:
VBS +<CR>
Adjusts bass up 1dB.
VBS -<CR>
Adjusts bass down 1dB.
The response will be:
VBS <value>
Where:
Value = -15dB to +15dB
Advertising