FSR IT-VCM - Manual (Page 13)

Page 13 of 16
Help Request:
The Controller can request a help menu if the user forgets the formats of the commands. There are
two types of help, a simple list of commands, and a detailed help with the request parameters.
The request for the full help list is:
"HLP" <CR>
The IT-VCM will respond with the following:
IT-VCM HELP MENU
VER
Returns Version Number
VER 3.04
VOL Adjust Volume
VOL F<CR>
F=+, -, -xx, or? (up, down, set dB or status)
VCM Returns VCM System Status
Version
Serial Out
Volume
Mute
POT
Pro/Consumer
Stereo/Mono
Treble
Bass
Balance
VMU Mute Request
VMU F<CR>
F= 0, 1, ? (off, on, status)
VTR Adjust Treble
VTR F<CR>
F= +, -, or ? (up, down, or status)
VBS Adjust Bass
VBS F<CR>
F= +, -, or ? (up, down, or status)
VBL Adjust Balance
VBL B<CR>
B= R, L, or ? (right, left, or status)
? Simple Help
HLP Full Help
SBA Serial Out Baud Rate
SBA 2 X<CR> Only Serial port 2 is allowed on VCM
X = Baud Rate = 1=2400 2=4800 3=9600 4=19200 5=38400 6=57600