Serial 2 baud rate request – FSR IT-VCM User Manual
Page 12
Advertising
Page 12 of 16
Serial 2 Baud Rate Request:
It may be necessary to change the baud rate on the last pass-through device serial port. This may
happen if the last device doesn’t have the baud rate at 38400, and doesn’t have a method to change
it.
"SBA"
Port
Baud rate number
<CR>
Where:
"SBA"
Change baud rate request
Port
Serial port number ("2" for IT-VCM)
Baud rate number
Which baud rate to change to:
"1"
=
2400
"2"
=
4800
"3"
=
9600
"4"
=
19200
"5"
=
38400
"6"
=
57600
The IT-VCM will respond to this request with a status message.
Advertising