FSR IT-VCM - Manual (Page 11)

Page 11 of 16
Balance Adjustment Request:
Adjusts the balance serially, from Center to Right or Left.
"VBL" Function<value> <CR>
Where:
"VBL"
VCM Balance Request.
Function
"R" "R" = VCM Balance Right request
"L" "L" = VCM Balance Left request
<value> number of steps to move (2 – 9) right or left
"?" VCM Balance Status Request Balance Status
The right and left (R,L) requests may contain a single digit that indicates how many steps to shift
the balance to the right or left. The range of increase or decrease is 2 to 9.
The IT-VCM will respond with a status message that reflects the balance setting after performing the
request (see below).
Example:
VBL R<CR>
Adjusts balance to the right channel one step.
VBL L<CR> Adjusts balance to the left channel one step.
VBL L5<CR> Adjusts the balance 5 steps left.
The response will be:
VBL <value>
Where:
Value = From L16 (Left 16) to CTR (Center) to R16 (Right 16)