GAI-Tronics CommandPLUS Series Desktop Console Installation and Service Manual - Manual (Page 45)

CommandPLUS Series Desktop Console Installation and Service Manual Features and Options
41 12/10
Direct Enhanced Full Duplex Phone Interface CP0070/XCP0070A
The Direct Enhanced Phone Interface option adds the Phone Patch and the Radio Patch features to the
CommandPLUS Series Desktop Console. It provides single line telephone functionality to the console.
Ring Detect Sensitivity
Jumper J400 is provided to allow operation under a wide range of ring voltages. It provides two ring
sensitivities:
•
JU400 IN (default) – 70 V ac ring voltage
•
JU400 OUT (parked) – 25 V ac ring voltage
Refer to the CommandPLUS Series Desktop Console Operator’s Manual for complete user instructions.
External Enhanced Full Duplex Phone Interface CP0060/XCP0060A
The External Enhanced Phone Interface option provides interface to a customer-provided telephone.
This allows use of the console’s headset/speaker/microphone while utilizing the features of the telephone
(including multi-line). Phone Patch and Radio Patch are also provided. Refer to the CommandPLUS
Series Console Operator’s Manual, Pub. 43004-016, for user instructions for the External Phone Interface
option.
Battery Revert XCP0080A
The standard battery revert feature consists of several components located on the main board of the
CommandPLUS. In order to provide for battery back-up, a secondary power source capable of providing
the necessary power for the console must be connected to pins 2 (+) and pins 1 or 4 (-) of the main power
connector, P5, of the console. Refer to Table 4 on page 15 for details.
MDC1200 STAT-ALERT Signaling CP0650/TDN9413A
The MDC1200 STAT-ALERT Signaling option provides RapidCall capability in Motorola radio
systems. Controlled operations include Radio Check, Call Alert, Radio Disable, and Select Call. This
signaling can be transmitted on the select channel or on a pre-programmed assigned channel only.