GAI-Tronics CB193-001 Call Boxes - Manual (Page 20)

Pub.: 43004-031E
Model CB193-xxx, CB194-xxx, and CB195-xxx RF Call Boxes Page 19 of 52
f:\radio products-current release\43004\43004-031e\43004-031e.doc
11/12
Field Installed Options/Accessories/Programming
Model 190-001BB Battery Back-up Kit
The Model 190-001BB Battery Back-up Kit provides 12 V dc power if main power is lost or
disconnected. The kit includes a bracket, Model 40201-004 1.3 Ah battery, two mounting screws, and a
gasket pad. The battery provides 300 cycle uses over a 7-day period @ 2 watt power setting and 100
cycle uses over a 7-day period @ 5 watt power setting, without the application of power. Refer to
Publication 43003-042 for installation details.
Model SPK100 Solar Panel Kit
The Model SPK100 Solar Panel Kit should be used for low usage Call Box applications (emergency type
applications) when an external power source is not available or feasible. This kit must be used with the
Model 190-001BB Battery Back-up Kit installed inside the RF Call Box. The Model SPK100 Kit
includes a solar panel array (5 watts) with a 10-foot connecting cable, a charge regulator module, and the
necessary mounting hardware for surface or pole mounting. The regulator module is mounted inside the
enclosure for all RF Call Box models. Refer to Pub. 43003-043 for installation instructions.
N OTE : The Model 40408-009 Battery Charger should be used to charge the 40201-009 battery (included
in the 190-001BB Kit) prior to installation in solar power applications.
Model XB001 External Long-Life Battery Enclosure
The Model XB001 External Long-Life Battery Enclosure includes a NEMA-4 weatherproof enclosure
with battery mounting bracket, a sealed 12 V dc external receptacle, and mating power connection cable.
The required Model 40201-008 18 Ah battery is purchased separately. This kit allows the RF Call Box
to be installed within 2 feet of the XB001 enclosure for true battery-powered operation.
Combining this kit with the Model SPK200 Solar Panel Interface Kit and Model GTRFP7784-108 Solar
Panel will provide a completely wireless operation. If the application is only temporary, the speaker can
easily be “unplugged” from the battery enclosure and relocated or stored. Refer to Pub. 43003-037 for
installation details.
N OTE : Model 40408-011 Battery Charger should be used for charging the 40201-008 battery in solar or
battery-only applications.