Gasboy CFN Site Controller - Manual (Page 19)

Pump Interface Manual v1.3 Tokheim 11
03/20/03 Gasboy CFN Series
Box contains more than one interface board, terminals 1-4 of J1 on interface board #1 can be
wired 1:1 to terminal 1-4 of J1 on interface board #2, etc. The following illustration shows the
wiring between the 3 devices.
Tokheim Dispenser Mode Settings
Mode 19
The Tokheim pump should be set to 0 when on-line to a Gasboy system. 0 sets the pump for
console approval and permanent arming. To set it in a manual mode, set it to 2 for permanent
arming, or 3 for key arming.
Mode 23
Mode 23 must be set up to reflect pump address, number of sides, number of hoses, numbers of
price displays, etc. See the Tokheim Dispenser Programming Manual for details.
Mode 25
Mode 25 in the Tokheim pump should be set to 1 to accept downloaded prices with the handle
offhook.