Gasboy CFN Series Diagnostic Manual - Manual (Page 81)

Site Controller II
03/19/04 3-17
J1, Memory Add Module Jumper (C05328 CPU PCB)
K23-K37 CPU Board Jumpers (C05852 CPU PCB)
Switches
DSW1 - Backup Sign-on, Hard Disk Access, Boot Modes
Switches DSW1-7 and DSW1-8 control three things:
•
the site controller mode (BOOT or MONITOR) when it is reset or powered up.
•
the status of the LED's (NORMAL or SCAN)
•
the site controller mode (BOOT or MONITOR) when it crashes
NOTE: See the Site Manager's Manual, Appendix A for explanations of the different modes.
DSW1-7 and DSW1-8 Mode Set Switches