Gasboy FMS KE200 - Manual (Page 80)

Encoding Keys Reading Key from the Keypad
Page 74 MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007
To read encoded key information, proceed as follows:
1 Turn the Manager key to “ENCODE”. The system displays the following:
2 Press ENTER. The system displays the first encoding prompt.
3 Press ENTER. The system displays the following:
4 To read the key, insert it into the key receptacle and turn it to the right. The system responds
with the first field on the key:
Line two contains the current value of that field.
5 To view the next field, press ENTER. The system displays the next encoded field.
6 Repeat step 5 until all fields are viewed.
7 The system displays the ENCODE KEY verification menu:
8 Turn the key to the left, remove it, and press ENTER.
9 To read another key, repeat this procedure from step 4 onwards.
10 To return to the ENCODE KEY prompt, press PREV.