Gasboy FMS KE200 User Manual
Page 86
Performing Maintenance
View Maintenance (1000 FleetKey only)
Page 80 MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007
1
Turn the Manager key to MAINT. The system prompts:
2
Insert the Fleetkey into the receptacle and turn it to the right.
3
Press F1. The system displays the following:
4
Press ENTER. The system prompts:
5
Enter the maintenance type to be viewed (A, B, or C) and press ENTER. The system displays
the following:
This display shows the maintenance type, and the date and odometer reading at which
maintenance was last performed. The second line shows the number of days and/or miles/
kilometers remaining until the next maintenance is due.
6
Press ENTER. The system returns to “SELECT MAINTENANCE” and you can select
another maintenance type to view.
Note: If you do not wish to view additional maintenance, press PREV. The “MAINTENANCE
MODE: VIEW MAINTENANCE” display reappears.