Gasboy FiPay Payment Network User Manual
Page 38
Installing FiPay (NBS)
Page 38
MDE-4999A FiPay™ Payment Network Installation and Setup Instructions · October 2012
Making Changes to the FiPay Configuration (MS-DOS Prompt)
FiPay is configured through an XML file that is created and managed during the installation
process. If any changes are required from the default setting after the installation has been
completed, proceed as follows:
1
Edit the “fipayincs_def.cfg” file and make a change to the settings made during the installation
script.
Figure 50: Editing fipayincs_def.cfg File
Notes: 1) The information shown in this figure is an example only.
2) Terminal ID will begin with GB.
2
Stop the FIPAYPINV4 service, push the changes into the main XML table using the
“FipayPinCsx.exe” program and then restart the FIPAYPINV4 service (see
).
Figure 51: Restarting FIPAYPINV4 Service