4 technical data – GBS Elektronik MCA 166 User Manual

Page 47

Advertising
background image

_______________________________________________________________________

47

4 Technical Data

4. 1. Mini MCA (MCA 166) Hardware Specifications

4.1.1 Amplifier:

1. Type
•

Gaussian programmable shaping amplifier with pile-up rejector and gated base line

restorer

2. Gain
•

From 1 ... 1000

•

Minimum gain step 0.5 channel for 2K scale

•

Gain tuning under visual control of spectrum

•

Gain adjustment by peak stabilizer

•

Integral linearity of amplifier <0.1% for full output range

3. Input
•

accepts positive and negative preamplifier signals

•

input resistance 1 kOhm

•

DC coupled, accepting +/-200 mV DC levels

•

maximum input signal corresponding to full ADC scale at minimum gain:

+/-3V (+/-10V with external attenuator) and input set to direct input. With input set to
amplifier the maximum voltage step from preamplifier corresponding to ADC full scale at
gain 1 is 9.5 V, corresponding to a peak voltage at the test point of 2.2V.

4. Pulse shaping

•

active integrator and single, pole zero compensated differentiator with two shaping

time constants (1 and 2 µsec)

5. Base line restorer (BLR)
•

Active, gated Base Line Restorer

6. Pole Zero Cancellation (PZC)
•

settings: automated by MCA software and manual setting option

•

designed for decay time of the preamplifier pulses >40 µsec ; screen indicator

allows PZC without scope

7. Pile UP Rejector (PUR)
•

settings: OFF and ON

4.1.2. ADC

1. Successive approximation ADC with sliding scale liniarization
•

Channel splitting 128, 256, 512, 1K, 2K, or 4K

•

Full input voltage range 3V, positive and negative (10V with external attenuator)

2. ADC Dead time (including time needed to write into memory)
•

< 8 µsec

Advertising