Highgear PulseWare Duo - Manual (Page 10)

9
english
KEYS AND THEIR FUNCTIONS
KEY ACTIONS – QUICK PRESS VS. PRESS AND HOLD
There are two key actions used to program the watch:
QUICK PRESS or PRESS
The key is pressed quickly and immediately released. This is the most
common key action and is used for most aspects of operation.
PRESS & HOLD
The key is pressed and held for 2-3 seconds. This key action is
generally used to initiate a programming or memory sequence or to
enter a sub-mode.
NOTE 1: Generally, when entering a setting sequence, the
word HOLD will appear on the top line of the display.
NOTE 2: In this manual, we will indicate when a PRESS &
HOLD is required.
In most other instances a QUICK PRESS should be assumed.
PROGRAMMING THE WATCH –
COMMON KEY ACTIONS
ENTER A PROGRAMMING SEQUENCE
PRESS & HOLD the EL/SET key.
The word HOLD will appear in the top line of the display.
Continue to hold the key until the display automatically advances
to the first variable in the programming sequence.
ADJUST VARIABLE IN A PROGRAMMING SEQUENCE
QUICK PRESS the SS key.
In most programming options, a PRESS & HOLD of the SS key
will cause the variable to fast advance, allowing you to quickly
advance to a different number.
CONTINUED NEXT PAGE
Pulseware_DuoMax_HighGear.indb Sec1:9 Pulseware_DuoMax_HighGear.indb Sec1:9 2/17/06 12:33:49 PM 2/17/06 12:33:49 PM