Operating the watch – Highgear PulseWare Duo User Manual
Page 25
24
english
OPERATING THE WATCH
OPERATING THE CHRONOGRAPH – PULSEWARE MAX
1. Advance to CHRONOGRAPH by
PRESSING
the
MODE
key.
2.
PRESS & HOLD
the
SS
key to clear data from previous workout.
3. To BEGIN TIMING,
PRESS
the
SS
key.
4. Use
QUICK PRESSES
of the
SS
key to
ADVANCE THE LAP CHRONOGRAPH. The
top line will display TOTAL ELAPSED TIME
for approximately 5 seconds then return to
display LAP NUMBER. The lower line will
display CURRENT LAP TIME.
5. To
STOP TIMING, use
2 QUICK PRESSES
of the
SS
key. To CONTINUE TIMING,
QUICK PRESS
the
SS
key.
NOTE:
Lap Chronograph will advance
when restarting the Chronograph.
6. To
CLEAR CHRONOGRAPH,
PRESS & HOLD
the
SS
key when
CHRONOGRAPH IS STOPPED.
NOTE: The Chronograph must be activated to record heart
rate and KCAL mode information.
Pulseware_DuoMax_HighGear.indb Sec1:24
Pulseware_DuoMax_HighGear.indb Sec1:24
2/17/06 12:34:13 PM
2/17/06 12:34:13 PM