Keys and their functions – Highgear PulseWare Duo User Manual
Page 11
10
english
KEYS AND THEIR FUNCTIONS
ADVANCE TO NEXT VARIABLE IN A PROGRAMMING
SEQUENCE
QUICK
PRESS
the
MODE
key.
When you have chosen the variable you want for a particular
portion of a programming sequence
QUICK PRESS
the
MODE
key to set and advance to the next variable.
EXIT A PROGRAMMING SEQUENCE
PRESS
&
HOLD
the
EL/SET
key to exit the setting sequence at
any time.
Once all variables of a programming sequence have been entered,
QUICK PRESS
the
MODE
key to exit the programming sequence
and return to the initial main display.
ACTIVATE THE DISPLAY BACKLIGHT SYSTEM
QUICK PRESS
the
EL/SET
key.
Activate the backlight system at any time with a
QUICK PRESS
of the
EL/SET
key. The backlight will remain active for a period of
5 seconds. If, while the backlight is active, another key is pressed,
the timer will be reset and the 5-second period will start again.
This will happen for as long as keys are pressed. This allows you
to easily operate and program the watch in low light situations.
NOTE: Excessive use of the backlight system will result in
shorter battery life.
Pulseware_DuoMax_HighGear.indb Sec1:10
Pulseware_DuoMax_HighGear.indb Sec1:10
2/17/06 12:33:50 PM
2/17/06 12:33:50 PM