Setting the watch functions – Highgear PulseWare Duo User Manual
Page 16
15
english
SETTING THE WATCH FUNCTIONS
SETTING THE CHRONOGRAPH (MAX & DUO)
Pulseware heart rate monitors are equipped with a 24-hour, 26-lap
chronograph.
Pulseware heart rate monitors have a programmable Training Zone
settable in single beats per minute to target the intensity level of your
exercise.
NOTE:
To enter the Chronograph setting sequence, any previous
workout information must be cleared by
PRESSING & HOLDING
the
SS
key for 2 seconds until the time display reads 00:00.
1. Advance to Chronograph by
PRESSING
the
MODE
key.
2.
PRESS & HOLD
the
SS
key to CLEAR previous workout.
3. Enter the SETTING SEQUENCE by
PRESSING & HOLDING
the
EL/SET
key.
4. Advance to set Training Zone by
PRESSING
the
MODE
key. ADJUST
UPPER LIMIT using
QUICK PRESSES
of
the
SS
key.
5. Advance to set Lower Limit by
PRESSING
the
MODE
key.
ADJUST
LOWER LIMIT using
QUICK PRESSES
of the
SS
key.
6 .
PRESS
the
MODE
key to EXIT the setting sequence and return to
Chronograph screen.
NOTE:
You can exit the setting sequence at any time by
PRESSING & HOLDING
the
EL/SET
key.
Pulseware_DuoMax_HighGear.indb Sec1:15
Pulseware_DuoMax_HighGear.indb Sec1:15
2/17/06 12:34:05 PM
2/17/06 12:34:05 PM