Highgear PulseWare Duo - Manual (Page 30)

29
english
CARE AND MAINTENANCE
CARE OF THE WRIST UNIT
Your Pulseware heart rate monitor should be protected from shocks,
extreme heat and extended exposure to direct sunlight. As the owner
of the product you should only perform service procedures related
to the changing of the battery as shown in this manual. You should
NEVER attempt to disassemble or otherwise service your watch.
When not in use, your watch should be stored in a clean, dry area at
room temperature.
If your Pulseware heart rate monitor gets dirty it should be carefully
wiped clean using a moist cloth. Care should be taken when cleaning
the lens not to rub dirt into the surface as it can become scratched
and hard to read.
CARE OF THE HEART RATE TRANSMITTER
After every use you should rinse the transmitter strap and elastic
in warm fresh water and dry with a dry cloth. Do not store the
transmitter when wet as this may shorten the battery life. The
transmitter should be stored flat rather than folded and should never
be bent or stretched as this may damage the electrodes. Never lay
your heart rate transmitter on a metal surface, as this will quickly
drain the battery.
Pulseware_DuoMax_HighGear.indb Sec1:29 Pulseware_DuoMax_HighGear.indb Sec1:29 2/17/06 12:34:17 PM 2/17/06 12:34:17 PM