Highgear PulseWare Duo - Manual (Page 21)

20
english
SETTING THE WATCH FUNCTIONS
ALARM MODE – PULSEWARE MAX
The Pulseware Max heart rate monitor is equipped with an alarm,
which can be set for any single day of the week or every day.
SETTING ALARM
1. Advance to ALARM mode by PRESSING the
MODE key.
2. SELECT DAY, ALL or OFF (upper left of display)
by PRESSING the SS key.
3. To SET ALARM TIME, enter the setting
sequence by PRESSING & HOLDING the EL/
SET key.
4. ADJUST HOUR using QUICK PRESSES of the
SS key.
5. Advance to SET MINUTES by PRESSING the MODE key.
ADJUST MINUTES using QUICK PRESSES of the SS key.
6. PRESS the MODE key to exit the setting sequence.
Pulseware_DuoMax_HighGear.indb Sec1:20 Pulseware_DuoMax_HighGear.indb Sec1:20 2/17/06 12:34:09 PM 2/17/06 12:34:09 PM