Setting the watch functions – Highgear PulseWare Duo User Manual
Page 17
16
english
SETTING THE WATCH FUNCTIONS
SETTING THE TIMER
Pulseware heart rate monitors are equipped with a 100-hour
countdown timer with 1-second resolution.
1. Advance to Timer by
PRESSING
the
MODE
key.
2.
PRESS & HOLD
the
EL/SET
key to enter the setting sequence.
3. SET TIMER to REPEAT (Pulseware Duo
only). The Pulesware Duo allows you to
program the Timer to automatically repeat.
Upper Line will display RE2. Select Repeat
OFF or ON in the lower line of the display
using
QUICK PRESSES
of the
SS
key.
PRESS MODE
key to advance to SET Time.
4. Adjust Hours using
QUICK PRESSES
of
the
SS
key.
5. Advance to Set Minutes by
PRESSING
the
MODE
key. ADJUST MINUTES using
QUICK PRESSES
of the
SS
key.
6. Advance to set Seconds by
PRESSING
the
MODE
key. ADJUST SECONDS using
QUICK PRESSES
of the
SS
key.
7.
PRESS
the
MODE
key to EXIT the setting
sequence and return to Timer screen.
Pulseware_DuoMax_HighGear.indb Sec1:16
Pulseware_DuoMax_HighGear.indb Sec1:16
2/17/06 12:34:05 PM
2/17/06 12:34:05 PM