Honestech VHS to DVD 4.0 Deluxe - Manual (Page 32)

32. honestech ™
Step Five
– Recording
Recording Status Display
– use this display to check the status of your recording, verify the
recording format (DVD, SVCD, WMV etc..), or monitor the size of your file.
The Maximum Recording Time (MRT) indicates how many hours of video recording are
available on your computers hard drive. See the Appendix for more MRT information.
Record
– click the record button at the bottom of the Capture screen when you are
ready to capture your video.
Stop
– click the stop button when you are ready to halt or cancel the capture process.
Any video that has been captured will appear in the Clip Panel on the right as a thumbnail
image.
If you wish to remove any video clips from the Clip Panel, first select the clip and then click the
remove button at the bottom of the panel.
Save
– When you are finished recording, it is always a good idea to save your project,
especially if you plan to edit or burn your video at a later time.
To save your project, click the Menu button in the top left corner
of the Capture screen and select Save Project.
When prompted, provide a descriptive project name that
matches your recording(s) and save to a familiar location on your hard drive.
*Your project will be saved as a VHS to DVD project file, see the Appendix for more information
about project files.
Now you can repeat the process to record more tapes, move on to the Edit screen if you need
to edit, or go directly to the Burn screen to burn your recording(s) to disc.