Honestech VHS to DVD 4.0 Deluxe - Manual (Page 59)

59. VHS to DVD™ 4.0 Deluxe
Video Problems
No video:

Check your cable connections to make sure they are secure.

Verify you are connecting your cables t o the ports labeled „Output‟ on your video player.

Verify you are only connecting one type of video cable, RCA (yellow) or S-Video.

Verify the output ports of your video player work by testing them with your television.

Verify the USB 2.0 VIDBOX capture device is plugged into your computer directly and
not through a USB hub.

Check your video & audio device settings from the Record Settings control panel (see
Step Two of the Advanced Mode – Capture section).

Verify your video cable connections setting by cl icking the „Settings‟ button next to the
Video Device listing (see Step Two of the Advanced Mode – Capture section).

Disconnect additional monitors
Black & White video:

Verify your video tape was recorded in the same video standard format for your region. If
it was not, see the Converting PAL/NTSC (and other video standards) section in the
appendix.
Pink/Green video:

Verify you are plugging your capture device into a USB 2.0 port attached to your
computer (avoid using external USB hubs).
Choppy video:

Verify your computer meets the programs minimum system requirements.

Avoid the following actions while recording and burning:
- Locking the workstation.
- Running other applications in full screen mode.
- Running CPU intensive programs.
Distorted lines at top or bottom of screen:

Clean VCR/camcorder tape heads.

Adjust VCR/camcorder video tracking.
(These lines are not usually visible on a regular television because a TV typically presents in
overscan mode
– causing the edges of the video to be out of view)