Ivoclar Vivadent IPS e.max ZirPress User Manual
Page 27
27
C
li
n
ic
a
l
S
te
p
s,
F
ra
m
e
w
o
rk
P
re
p
a
ra
ti
o
n
,
C
o
n
to
u
ri
n
g
,
P
re
ss
in
g
P
ro
ce
d
u
re
Provide a
cold
IPS Alox Plunger and
cold
IPS e.max
ZirPress ingots in the desired shade.
Place the
cold
IPS e.max ZirPress ingot into the
hot
investment ring, with shade imprint facing upward.
Then, place the powder-coated side of the IPS Alox Plunger
into the
hot
investment ring.
Place the
hot
and completed investment ring in the center
of the
hot
press furnace using the IPS Investment Ring
Tongs
Press START to start the selected program.
Once the press program is completed, place the hot invest-
ment ring on the cooling grid using the investment ring
tongs and allow it to cool to room temperature.
Provide a
cold
IPS Alox-Plunger and
cold
IPS e.max
ZirPress ingots in the desired shade.
Place the
cold
IPS e.max ZirPress ingot into the
hot
investment ring, with shade imprint facing upward.
Place the
cold
IPS One-Way Plunger 300 g ing the
hot
investment ring.
Place the
hot
and completed investment ring in the center
of the
hot
press furnace using the IPS Investment Ring
Tongs
Press START to start the selected program.
Once the press program is completed, place the hot invest-
ment ring on the cooling grid using the investment ring
tongs and allow it to cool to room temperature.
Procedure for pressing when using the…
IPS Alox Plunger for the IPS Investment Ring System 100, 200 g
IPS One-Way Plunger 300 g for the IPS Investment Ring System 300 g