Ivoclar Vivadent IPS e.max ZirPress User Manual
Page 39
39
Incisal firing
With the IPS e.max Ceram layering materials (e.g. Transpa, Transpa Incisal, Impulse), the anatomical shape is completed
and the individual esthetic appearance achieved. Use the IPS e.max Ceram Build-Up Liquids allround or soft to mix the
materials. If required, conduct a second Incisal firing using the same firing parameters.
Application of Impulse materials, e.g. Opal Effect 1
Complete the restoration using, Incisal materials and Opal Effect 3, for instance.
Place restoration on the firing tray and fire with the firing parameters for the Incisal firing.
Restoration after Incisal firing
Firing parameters for the Incisal firing
IPS e.max Ceram on IPS e.max ZirPress
B
S
t
➚
T
H
V
1
V
2
L
Cut-Back and Layering Technique
°C/°F
min.
°C/°F/min
°C/°F
min.
°C/°F
°C/°F
°C/°F
Incisal firing
403/757
4:00
40/72
750/1382
1:00
450/842
749/1380
0
C
u
t-
B
a
ck
Te
ch
n
iq
u
e