Ivoclar Vivadent IPS e.max ZirPress - Manual (Page 34)

Example of use: IPS e.max ZirPress HT inlay-retained bridge
Application of the ZirLiner on the sintered IPS e.max ZirCAD framework. Use ZirLiner orange
in the fissure area. For the firing procedure, position the framework on the honey-combed firing tray using metal
pins and IPS Object Fix Flow.
Fully anatomical wax-up of the inlay-retained bridge. The ZirCAD framework must be
designed in such a way that all preparation margins can be designed in wax and IPS e.max
ZirPress. Wax-up sprued with a wax wire (ø 3 mm). A holding pin at the ZirCAD framework secures
the framework in the investment material.
Pressed inlay-retained bridge on the model. The Stain and Glaze firing is conducted with IPS e.max Ceram Glaze, Shades and Essence
34