Press and firing parameters, Press parameters for ips e.max zirpress – Ivoclar Vivadent IPS e.max ZirPress User Manual
Page 73
73
Press Parameters for IPS e.max ZirPress
Take the press furnace and the selected investment ring size into account
B
t
➚
T
H
V
1
V
2
A
°C/°F
°C/°F/min
°C/°F
min.
°C/°F
°C/°F
700/1292
60/108
900/1652
15
500/932
900/1652
Programm 11–20
700/1292
60/108
910/1670
15
500/932
910/1670
Programm 11–20
700/1292
60/108
940/1724
40
500/932
940/1724
Programm 31–51
700/1292
60/108
900/1652
15
500/932
900/1652
300
700/1292
60/108
910/1670
15
500/932
910/1670
300
700/1292
60/108
930/1706
40
500/932
930/1706
250 µm/min
Press Furnace
IPS Investment
Ring System
100 g
200 g
300 g
100 g
200 g
300 g
EP 500
EP 600/
EP600 Combi
The parameters indicated represent standard values and apply to the Ivoclar Vivadent furnaces EP 3000 and EP 5000.
The temperatures indicated also apply to older model furnaces. However, the temperatures may deviate by approx.
± 10 °C/18 °F depending on the age of the heating muffle.
If a non-Ivoclar Vivadent furnace is used, temperature corrections may be necessary.
Regional differences in the power supply or the operation of several electronic devices by means of the same circuit
may also render adjustments of the temperatures necessary.
Press and Firing Parameters
Select the press program in accordance with the investment ring size used.
Programat EP 3000
Select the press program in accordance with the investment ring size used.
Note:
Starting with software version V3.3, the IPF (Intelligent Press Function) is
available for IPS e.max ZirPress. With this function, the pressing times in the
IPS Investment Ring System 300 g can be substantially shortened.
Programat EP 5000