Veneering with ips e.max ceram – Ivoclar Vivadent IPS e.max ZirPress User Manual
Page 37
Advertising
37
C
u
t-
B
a
ck
Te
ch
n
iq
u
e
Veneering with IPS e.max Ceram
The following paragraphs will explain the most important veneering steps. For further
information on the nano-fluorapatite layering ceramic and its processing, please refer
to the IPS e.max Ceram Instructions for Use.
Blast the restoration with Type 100 Al
2
O
3
at 1 bar (15 psi) pressure. Thoroughly clean the surface with a steam jet prior to the wash firing and subsequently dry.
Advertising