Ivoclar Vivadent IPS e.max ZirPress - Manual (Page 52)

52
Optional
Wash firing (foundation) characterization
IPS e.max Ceram Essence can be used to design intensively characterized areas. These materials are
excellently suitable for individualized characterizations.
Layering materials must not be applied on unfired wash layers, since this will result in a delamination of the
layering ceramic. The wash (foundation) must be fired before the actual layering procedure is started.
Firing parameters for the Wash firing (foundation firing) characterization
IPS e.max Ceram on IPS e.max ZirPress B S t
➚
T H V 1 V 2 L
Gingiva Technique °C/°F min. °C/°F/min °C/°F min. °C/°F °C/°F °C/°F
Wash firing (foundation) characterization 403/757 4:00 40/72 750/1382 1:00 450/842 749/1380 450/842