Ivoclar Vivadent IPS Eris for E2 - Manual (Page 25)

25
Contouring
Framework design depending on the total space
available
Full wax-up
Fabricate a full wax-up of the restoration. Use IPS Connector
to ensure the adequate size of the connector between the
pontic and the bridge abutment.
Version a: Adequate space is available
If adequate space is available, the bucco-labial and the
palatal-lingual portion of the modelled framework is reduced
in a targeted fashion. Reduce the wax-up by the space
required for the layering material to be applied after
pressing. Observe the necessary ratio of the framework
thickness to the layering material thickness, as described on
page 23. IPS Connector ensures that the minimum connector
thickness between the pontic and the bridge abutment is
observed.
... and the palatal-lingual portion of the modelled framework is reduced
The bucco-labial ...
Use IPS Connector to ensure the adequate size of the connector between the pontic and the bridge
abutment.
Wax-up from labial.
The areas to be built up with layering material are clearly visible.
Wax-up from palatal.