Ivoclar Vivadent Telio Lab - Manual (Page 13)

Telio Lab
General processing instructions
Designing the shape with a wax-up and silicone key
The tooth shape and function are designed with the help of a wax-up and secured with a silicone key.
Minimum material thicknesses / layer thicknesses
The restoration design is key to the success of a temporary restoration. The more attention given to the
design, the better the final results and the clinical success will turn out to be.
The following basic guidelines have to be observed:
– Support the restoration with a framework (metal, Vectris) in long-span bridges or if space is limited.
– The minimum wall thickness of 1.5 mm occlusal and 0.8 mm circular must be observed at all times.
– The connector dimensions for anterior bridges with up to two pontics must be at least 12 mm
2
– The connector dimensions for posterior bridges with one pontic must be at least 12 mm 2 and with up
to two pontics at least 16 mm 2
Wax-up Silicone key
Important
Support the restoration with a framework (metal, Vectris) in long-span bridges or if space is
limited.
Telio
Lab
–
General
pr
ocessing
instructions
13