Ivoclar Vivadent Telio Lab - Manual (Page 44)

What type of restorations can be fabricated
with Telio Lab?
– Temporary application:
Crowns and bridges (metal-free / metal-
supported)
– Permanent application:
Supplements to artificial teeth in removable
dentures
Can Telio Lab Incisal be used for the individu-
alization of the incisal area of a Telio CAD res-
toration?
Yes. However, the following processing guidelines
have to be observed:
– Blast the ground surface with pure Al
2
O
3
, grain
size 100 µm and 2 bar/29 psi pressure, and
clean. Apply Telio Lab Cold Liquid by means of
a brush and let it react for min. 2 to
max. 4 minutes before starting the application
of Telio Lab Incisal materials.
– The Telio Lab Incisal materials can be applied by
means of the silicone key technique or free
layering technique.
– The overall layer thickness of the restoration
should not be less than 1.5 mm.
Must SR Gel always be used?
For the tempering of Telio Lab LC Transpa and Telio
Lab LC Base, SR Gel must always be used. If this is
not done, the inhibited layer will be too thick,
which may lead to clinical failure.
44