Ivoclar Vivadent Telio Lab - Manual (Page 7)

Composition
• Telio Lab Cold Liquid / Telio Activator
Components: Methyl methacrylate, triethylene
glycol dimethacrylate (TEGDMA),
dimethacrylate and catalyst (<1%)
• Telio Lab Dentin, Transpa Incisal, Neck and
Intensive Powder
Components: Polymethyl methacrylate, catalyst,
and pigments (<2% wt.)
• Telio Lab Opaquer Powder
Components: Copolymer, aluminium oxide,
barium sulphate and titanium dioxide, catalyst,
and pigments (<2% wt.)
• Telio Lab Opaquer Liquid
Components: Methyl methacrylate, catalyst
(<1% wt.)
• Telio CAD Blocks
Components: Polymethyl methacrylate
(PMMA), pigments
• Telio Lab LC Transpa Incisal
Components: Urethane dimethacrylate,
dimethacrylate, copolymer and silicon dioxide
(65% wt.)
• Telio Stains
Components: Bis-GMA, urethane dimethacry-
late, triethylene glycol dimethacrylate, fillers,
stabilizers, initiators and pigments
• Telio Lab LC Base
Components: Urethane dimethacrylate,
dimethacrylate, copolymer and silicon dioxide
(65% wt.)
• Telio Add-On Flow
Components: Bis-GMA, urethane dimethacry-
late, triethylene glycol dimethacrylate, fillers,
initiators, stabilizers and pigments.
Total content of inorganic fillers: 30% vol., filler
particle size: 0.04–0.20 µm.
• SR Composiv
Components: Dimethacrylate; silicon dioxide
(16–17% wt.).
Additional contents are catalysts, stabilizers
and pigments (< 2.5% wt.)
7
Side effects
Systemic side effects are not known to date. In
individual cases allergic reactions to PMMA
materials have been reported.
In rare cases, components of the Telio Lab
materials may lead to sensitization. Telio Lab
should not be used in such cases.
Storage instructions
– Store packages in use at room temperature
(2–28 °C/35–82 °F).
– Protect the materials from direct sunlight.
– Observe the storage instructions and the date
of expiration on the secondary packaging.
– Do not use the products after the indicated
expiration date.
– Keep out of the reach of children!
Pr
oduct
information
Warning
– Telio Lab Cold Liquid, Telio Activator and
Telio Lab Opaquer Liquid contain methyl
methacrylate (MMA).
– Do not use in case of known allergy to
methyl methacrylates.
– MMA is highly flammable and irritating
(flash point: +10 °C/50 °F).
– Irritating to eyes, respiratory organs and skin.
– Do not inhale vapours.
– Keep away from sources of ignition. Do not
smoke.
– Prevent contamination of sewage system.
– Take measures against electrostatic charge.
– Contact of the uncured Telio materials with
the skin, mucous membrane or eyes must be
avoided. Unpolymerized Telio CS materials
may cause slight irritation and may lead to a
sensitization against methacrylates.
Customary medical gloves do not provide
protection against the sensitizing effect of
methacrylates.