Leprecon LP-612 - Manual (Page 2)

1
EZ PROGRAMMING THE LP-600 SERIES
Programming Preset Memories................................................
1. Press the "Preset" menu to light the "Page" LED
2. Select desired page (1-4) using display "Up" or "Down" arrows
3. Press "Record" button
4. Set desired look by arranging X scene channel faders
5. Store by pressing bump button beneath desired preset fader
on Y scene, continue setting and recording
6. Press "Run" to play scenes back
Programming a Chase...............................................................
1. Press "Chase" button to light "Pattern" LED
2. Select desired pattern (5-11) on display using "Up" arrow
3. Press "Chase" menu button again to light "Step" LED
4. Press "Record" button
5. Set desired look on X scene faders
6. Press the display "Up" key to record & advance to next step, continue to set and
record chases
7. Press "Run" key to end programming
To Record Stack Presets............................................................
1. Press the "Stack" menu button to display ‘now’ scene.
Use the "Down" key to set now to ‘—’(CL may momentarily appear).
2. Press the "Stack" menu key again to light the "next" LED.
3. Use the display up and down keys to select a cue number of 1 through 50.
4. Set levels on stage using manual channels or Presets.
5. Press the "Record" key once. The "Record" LED will begin to blink.
6. Press "Record" again to memorize the cue. The next cue number will
advance.
7. In record mode, continue setting desired levels on stage and
recording cues (stacking).
8. Press "Run" to end recording and activate "Cue Stack".
9. While in "next" mode use display Up and Down keys to call up
first cue for playback.
10. Use "Stack" fader to manually crossfade between cues or use GO
button to time fade to next cue.