LSC Lighting EKO - Manual (Page 15)

EKO Dimmer EKO Dimmer Installation
Operator Manual V2.3
LSC Lighting Systems (Aust) Pty. Ltd Page 11
4.4.2 Installation Frame Spacing
When mounting the Installation Frames, observe
the minimum gaps between adjacent frames and
walls to allow sufficient ventilation.
4.4.3 Connecting the Load Circuits to
the Installation Frame
Active (A), Neutral (N) and Earth (E)
connections are provided for each load circuit.
Connect the load circuits to the numbered “load
terminal strip” screw connections. The terminals
are suitable for stranded or single conductor
cables with the following sizes;
Model
EKO
324 EKO
312 EKO
612 EKO
606
Load Terminal
Sizes
4mm² 4mm² 10mm² 10mm²
EKO 324 and 312 Load Terminals
EKO 612 and 606 Load Terminals
4.4.4 Connecting Control Signals to
the Installation Frame
The EKO dimmer can be remotely controlled by
DMX512/1990-A or by LSC ePlates via the
LSCnet.
4.4.4.1 CONNECTING DMX512
DMX 512 is the industry standard for the
transmission of digital control signals between
lighting equipment.
DMX is usually “looped” from one piece of
equipment to the next. See “DMX Explained and
Typical Installations” for more information.
DMX 512 can be connected to the EKO by using
either
the RJ45 connectors or the quick
connect terminals located on the connector
board on the Installation frame.
All DMX512 connectors are high impedance and
wired in parallel, allowing the DMX512 to be fed
into one connector and looped out of another.
The RJ45 DMX sockets can be used for either
DMX input or DMX output.
If using the quick connect terminals, connect
both the DMX input and output cables in parallel
into the same connectors.
Installation Frame “Control Connector Board”
340 mm
150 mm
150 mm
150 mm
580 mm between centres
4mm²
Load
terminal
strip
LSCnet RJ45
connectors
10mm²
Load
terminal
strip
In Stage 2,
dimmers
are
plugged
into these
sockets
In Stage 2,
dimmers
are
plugged
into these
sockets
DMX512 RJ45
connectors
LSCnet
Termination
switch
DMX512
Termination
switch
DMX512 Quick
connect terminals.
COM DMX- DMX+