Microsonic LCA-2 - Manual (Page 10)

Page 10 of 51 Preparation
S
ELECTING THE
COM-P
ORT
For the communication of LinkControl with the computer, you have to select the COM-Port.
D IRECTLY SELECTION OF THE COM PORT
If you know the used COM-Port,
 Use the pull down menu „Setup | Port“ to select the COM-Port 1…23.
A UTOMATICALLY SEARCH THE COM-P ORT
If the COM-Port is unknown, LinkControl is able to identify the COM-Port, used by the LinkControl
Adaptor.
 Select „Setup | Find LinkControl Adaptor“ and follow the instructions of the software.