Microsonic LCA-2 - Manual (Page 15)

Reading / writing parameters Page 15 of 51
 Connect an R1 sensor of the same type to the LinkControl adaptor (Ics-25/DD/HV/QP R1 shown
in the example).
LinkControl automatically recognises the connection of a different sensor and asks you whether the
parameters of this sensor are to be read out.
 Click "No" to cancel the process
 Click
LinkControl now converts the parameters of the old sensor into new parameters for the R1 sensor. If
LinkControl was able to convert all parameters, you are offered the option of either directly writing the
converted parameters into the new sensor or checking the converted parameters on the screen mask:
 Click the button "Verify" to verify the converted parameter first, or click "Write" to write the
converted parameter directly into the new sensor.