Microsonic LCA-2 - Manual (Page 3)

C
ONTENT
Page 3 of 51
Preparation 5
Delivery scope 5
System requirements 5
Installing the Software 6
Connection of the LCA-2 7
Pinning / colour coding 8
Launching the LinkControl software 9
Selecting the COM-Port 10
Directly selection of the COM port 10
Automatically search the COM-Port 10
Reading / writing parameters 11
Reading parameters from a connected sensor 11
Reading parameters from a file 12
Transmit parameters to the sensor 13
Conversion of parameters for the R1 sensors 14
Saving parameters to a file 17
Changing parameters on distance measuring sensors 18
Adjustment of temperature compensation 21
Setting the sensor to its defaults 22
Changing parameters for switching sensors 23
Changing parameters for analogue sensors 25
Filter settings for distance measuring sensors 27
All Sensor families excepting mic-.../M30, lcs, lpc and ucs 27
Sensor families mic-.../M30 und lcs 29
Sensor families lpc und ucs 31
Parameter change in the double sheet control 32
Operating modes 33
Output functions 35
Measuring value writer 35
Parameter change in the Label-/Splice Sensors esp-4 and esf-1 37