NavCom StarFire Satellite Change Rev.G - Manual (Page 14)

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12
Rev. G xiv Release - March 12
SF-2110 – All versions
Please follow the procedure below to manually tune the StarFire receiver to the new frequency for the satellite
located at 25.5° East. This instruction applies to SF-2110, all versions.
This instruction assumes that the receiver is currently licensed for and tracking StarFire satellite signals. If
after completing this instruction, the receiver is not tracking StarFire signals, please refer to the
StarFire
Tracking Troubleshooting Guide .
View AE – Version Information
Select Receiver Messages NCT output from the
menu bar. The NCT Binary Messages window opens.
o Ensure that these messages are scheduled for
output:
86 – On Change
A0 – On Change
AE – Every 600 Seconds
B1 – On Change
D1 – Every 600 Seconds
D3 – On Change
DB – Every 600 Seconds