NavCom StarFire Satellite Change Rev.G - Manual (Page 21)

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12
Rev. G xxi Release - March 12
Define Satellite
o Select Detailed Views StarFire
o Check Enter User-Defined Satellite
o Set the Frequency(KHz) to Satellite ID per Table 4 for the appropriate area of operation
Older versions of StarUtil 3000 will not allow decimal place value to be entered. When this
happens, utilize the Input Terminal window and the command [DEFINESFSAT]:
Example:
Command: [DEFINESFSAT] define_delete, {satellite_id}, {frequency}
Parameter Definition
Define_delete Keyword (DEFINE, DELETE)
Satellite_id Satellite ID number (integer) (320 to 680)
Frequency Satellite frequency (KHz; no commas)
[DEFINESFSAT] define, 678, 1539862.5
Table 6: Sapphire, SF-3040, and SF-3050 Satellite ID’s For New Satellites
Location Net Satellite ID Frequency (KHz) New Service on-air
54W 2 446 1,539,842.5 2/15/2012
178E 2 678 1,539,862.5 2/15/2012
143.5E 1 644 1,539,892.5 1/11/2012
98W 1 403 1,539,872.5 1/18/2012
64E 2 564 1,539,872.5 2/15/2012
25E 1 526 1,539,862.5 2/22/2012