NavCom StarFire Satellite Change Rev.G - Manual (Page 17)

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12
Rev. G xvii Release - March 12
View D3
o After a few minutes, the receiver should be tracking the new StarFire Satellite
LBD DSP Status
Check SF Channel Number
Net 1
403 satellite located at 98 West
644 satellite located at 143.5 East
526 satellite located at 25 East
Net 2
446 satellite located at 54 West
678 satellite located at 178 East
564 satellite located at 64 East
Check StarFire signal C/No Value which should be above 0dB (>9dB is typical at
NavCom’s office in Southern California)
If the receiver is moved from one StarFire region to another, the receiver will not automaticly tune to
the new receiver frequency. When this occurs, repeat the initial steps with the appropriate new
frequency and ID.