NavCom SF-2110 Rev.C - Manual (Page 21)

SF-2110 User Guide – Rev. C
signal reception in challenging environments such as
high geographic latitude.
‡
Both the GPS antenna port (ANT 1) and
the StarFire antenna port (ANT 2 -
SF-2110R only) provide 5.0VDC. Care
must be taken to select an appropriately
rated GPS antenna if the standard
NavCom antenna is not used.
Bluetooth
Only SF-2110M and SF-2110R sensors with the
Bluetooth icon on the front indicator panel are
Bluetooth capable (see Figure 11). The Bluetooth
module permits cableless operation between the
sensor and a Bluetooth equipped controller. Wireless
connectivity is provided within a range of 10 meters
(32 feet). The Bluetooth module contains Bluetooth-
certified components, and is FCC and CE certified.
‡
Refer to the StarUtil-2110 User Guide
for instructions to setup Bluetooth
communications via the supplied NavCom
software utility, StarUtil-2110, (see Related
Documents in the fore-matter).
* Consult Release Notes on the NavCom web site for availability.
1-19